Installing Pergo Flooring Over Hardwood

June 09, 2021

It is possible to install pergo extreme flooring over many existing floor coverings, providing it is stable and firmly fixed. Some pergo laminate products feature attached underlayment;

Pin on My family room is ugly.

The first step is to prep the room where you will be installing the vinyl plank flooring by removing all furniture and sweeping any debris or dirt.

Installing pergo flooring over hardwood. Ad stone touch is your complete source for floor care, maintenance and restoration. The tongue and groove click together for easy installation. Laminate flooring can be installed directly over hardwood, often with no preparation necessary.

Pergo laminate and engineered flooring can be installed on any level of your home. If your subfloor is already hardwood, but you want to improve the look of your home with new material, it is possible to lay engineered hardwood over the existing floor with proper. You will need a miter saw to cut your flooring to the proper length.

While i do really like our pergo flooring, there absolutely are better flooring options out there. In order to properly install hardwood on uneven flooring, the floor itself has to be smoothed out. Check with the flooring manufacturer for recommendations.

Installing hardwood on uneven floors. On renovation projects, you can lay pergo on top of existing hardwood floors that are in reasonably good condition; You must be mindful of the fact that in many older homes, the hardwood floorings may be in rough conditions.

It’s important to note pergo flooring is. If you’re dead set on keeping the original direction, a minimum 3/8 plywood sub floor should be installed over the older floor. Or, if the thickness of the floor will allow it, staple to the existing floor.

Cover the ground in the crawlspace with black plastic with a minimum thickness of 6 mils. Pergo can be installed directly over most hard surface flooring; For concrete surfaces, sanding and polishing may be required.

Pergo hardwood must be installed above grade. Pergo is a great affordable option for durability and look. Before you begin, you should bring the flooring material into the space and let it acclimate to the temperature for 24 hours to reduce the risk of shrinking or expanding after installation.

Contact your pergo extreme flooring dealer for assistance as needed. Overlap sheets by a minimum of 6 inches, and connect the seams with waterproof tape. Be aware that unevenness and imperfections in the subfloor may translate through the planks, negatively affecting the final appearance of the installation.

We learned this the hard way. We want to install either laminate or hardwood flooring throughout most of our home. Ehow may earn compensation through affiliate links in this story.

Do not install in full bathrooms or powder rooms. Pergo locking engineered hardwood flooring may be installed over any structurally sound subfloor that is flat, clean and dry on all grade levels. No glue, no nails, no mess!

Newly fastened floors over existing wood floors should be installed opposite (example photo right) or at a 45 degree angle to the original direction. Pergo is easy to clean and resists scratches. Ad stone touch is your complete source for floor care, maintenance and restoration.

Installing it over hardwood is an easy, often diy process that allows a way to enjoy the benefits of vinyl without doing damage to the existing hardwood. Pull any protruding nails or fasteners and sand down any floorboards that are bent or angled up. If that is the case, you will need to do some basic preparations prior to installing the laminate flooring on top of your existing hardwood floor:

I pulled up all the carpet and found 3/4 particle board over 1/2 plywood board subfloor underneath the carpet. The home is about 35 years old. The beauty in pergo is that it can be installed over most old flooring, but we wanted to remove everything to avoid a height difference between our existing hardwood in the living room and the two rooms we were installing in.

Installing wood flooring requires a proper subfloor. It is particle board and not osb. The particle board does not.

Considerations for installing laminate flooring over hardwood. Pergo laminate and locking engineered planks simply click together. It is a floating floor so you don’t need a flooring nailer to install it.

If you have a higher profile carpet that is plush and padded (like we do) you need to lay a solid surface down to make it firm. For $2.27 / sf, it will give you the look of beautiful light colored oak flooring for a fraction of the price. Choosing the best vinyl flooring to go over an existing hardwood floor doesn’t need to be complicated or worrisome.

If the floor simply tilts, most hardwoods (especially engineered hardwoods) will be able to be installed quite easily. A table saw or circular saw will come in handy for ripping the planks to width when you come to. After j spent a full day and a sleepless night measuring, cutting, and laying the floor down it ended.

Because pergo flooring expands and

A finished basement is one that has a ceiling which covers